Table of Contents
Advertisement
NVR Software - SeeTec Surveillance
Enter text for message display
With respect to alarms with medium or high priority, you can enter a free text in
Message displayed that is then displayed in the message display.
Play sound
If you select Play sound, a sound matching the priority of the alarm scenario is
played on every start of an alarm.
1. Select, whether Play sound should run at alarm activation (= alarm is active
and is displayed in client) or when alarm occurs (= alarm has just occurred).
Running external applications
1. Click on Select and select the respective .exe file of the desired application.
2. Confirm with Open.
The external application will be launched if the alarm is triggered.
Visualization
There are two types of visualization that can be combined:
Layers and cameras:
Under Layers and cameras you can specify which layers and cameras will
be displayed in the corresponding windows in Surveillance Mode. Click on
Window mode to switch between normal mode and fullscreen mode. Click
on Window to display the layer / camera in the main window or in one of
the slave windows.
Alarm cameras:
Under Alarm cameras, you can mark cameras as alarm cameras (= red
frame around the camera in case of alarm) and display them in a flyout
window.
118
Important
The application must be available on the local client computer.
Note
Alarms with low priority are immediately terminated when the alarm
ends, i.e. all open dynamic elements (layers, cameras and flyout
windows) are closed and the previous layer is recreated. Alarms
with medium / high priority are only terminated upon confirmation.
Advertisement
Table of Contents
