Extended Alarm Filters In The Archive - SUPERLOLUX NI525A User Manual

NVR Software - SeeTec Surveillance
 Update timeline
The timeline is updated periodically. Click on Update timeline to
immediately view the newest recorded images.
 Next alarm
Click on the Next alarm button to jump to the next alarm. If multiple
cameras are displayed simultaneously, the software searches for the next
available alarm in these cameras and jumps to this alarm.
 Time line zoom in / Time line zoom out
With the zoom function you can continuously zoom in or out. Clicking on the
time bar and scrolling the mouse wheel also allows you to zoom within the
recording period.
 Synchronized mode
Enable the synchronized mode. When starting playback, all cameras are
synchronized for the time of the selected camera.
 Playback speed
Select the playback speed (speed factor between 0.1 and 10).
 Real time playback
If the Real time playback option is selected, the recorded images are
played back in a way that playback and recording duration are identical.
Playback speed is set to 1 (real-time) to avoid time-lapse and slow-motion
effects.
 Jump gaps
If the Jump gaps option is activated, recording gaps that may occur during
alarm recordings are skipped automatically.
The zoom function is also supported in Archive Mode.
You can control playback using a joystick (jog dial or shuttlewheel), see chapter
Activating input devices (page 45).
5.5.4

Extended alarm filters in the archive

Extended alarm filters can be enabled optionally.
1. Right-click on the timeline and select the Filter display option.
2. Select a filter.
You can select the following filters:
 Display all recordings
 Display alarms only
 Displaying alarms of one alarm scenario only (Select the name of the alarm
scenario.)
158