Nvr Software - Seetec Surveillance; General - SUPERLOLUX NI525A User Manual

5

NVR Software - SeeTec Surveillance

5.1

General

Almost all SeeTec 5 settings and the presentation of image data can be performed
through a client (SeeTec Surveillance). This client is the central control and
display unit of the surveillance system and is used for the configuration of all
SeeTec 5 services.
Since all settings can be accessed through a single application, the administrator
effort is reduced (less physical travel or use of multiple individual software
modules).
Individual modes are listed in the main menu in the File menu and can be selected
if the respective rights are assigned to the logged-in user. If this is not the case,
these functions are not displayed.
Due to the service-based approach, you do not need to start the SeeTec
Surveillance to record image data. The recording process is launched
automatically when the server is started.
The client features four different modes, providing the user with a clear and task
oriented perspective:
 Surveillance Mode
This mode enables the display of Live image data and / or incoming alarms
and supports camera control.
 Archive Mode
This mode is used to view and export recorded image and event data.
 Report Mode
In this mode, you can display and assess different events (alarm events,
user logon and logoff, etc.).
 Configuration Mode
The Configuration Mode is used to configure all settings that are to be
used and executed by services.
NVR Software - SeeTec Surveillance
59