Table of Contents
Advertisement
NVR Software - SeeTec Surveillance
Creating a TCP alarm port
1. Use Edit to add an input.
2. Activate the input.
3. Enter a name in the Name field.
4. Enter a port in the Port field.
5. Enter the dead time in the Dead time (s) field.
The dead time is the time at which no other incoming signal is accepted after the
first incoming signal.
6. Leave all other settings unchanged.
Configuring the SeeTec archive
With the Archive, you can integrate exported image data in SeeTec 5 and access it
in Archive Mode.
1. Create a new hardware.
2. Enter a name for the archive in the Name field.
3. In the Manufacturer dropdown list, select the SeeTec option.
4. In the Type dropdown list, select the Archive option.
5. To modify the archive, select it in the Component overview and click on Edit.
General
6. In the General menu, specify the CameraManagement server and the
MultimediaDatabase server that will manage the archive images.
94
Abbildung 5:
Note
The software does not feature an auto increment function for
automatically populating the port information. Enter a Port, right-
click on the Port field and confirm the auto increment prompt with
Yes.
Note
Make sure that the exported image data is available on the
according SeeTec server.
Configuring a TCP alarm port
Advertisement
Table of Contents
