Table of Contents
Advertisement
NVR Software - SeeTec Surveillance
Digital outputs
1. Activate the digital outputs.
2. In the Name for CLOSED and Name for OPENED fields, enter a unique
name.
3. In the Hold time (s) field, enter the time at which the output is opened or
closed (0 = infinite).
Enable virtual cameras
Virtual camera configuration is only available for specific camera models.
1. Activate the virtual camera feature to display and store multiple image
details from one camera as individual cameras.
Enabling the virtual camera feature creates several virtual cameras.
The number of virtual cameras depends on the camera model. The camera
configuration is the same as for a regular camera.
Selecting the image detail is further explained in the chapter Selecting virtual
camera cropping (page 73).
Camera configuration
General
The name of the camera specified in the Name field and the selected Icon are
displayed in Surveillance Mode. You can add more icons in the Extras > Image
management menu.
The Camera type and Camera ID fields are relevant for analog video servers
only. Change the information in these fields only if you previously changed the
information on the video server as well.
If the camera features an ImmerVision lens, activate the ImmerVision
Panamorph lens checkbox to rectify the camera image.
68
Note
The following options can only be configured if the camera provides
the corresponding interfaces.
If fields are grayed out, the setting must be carried out directly on
the camera!
Advertisement
Table of Contents
