Table of Contents
Advertisement
Note
Make sure that the IP address within the URL matches the IP
address of the camera with the generic video driver.
Copying hardware
An existing camera or similar hardware component can be used as a template for
adding cameras.
The cameras must be of the same type as the camera used as a template.
1. Select the camera in the component overview.
2. Click on Copy.
The copy wizard will be opened.
3. Select the number of copies.
4. Change the camera name.
5. In the Address range, enter the IP address of the first copied camera.
The IP addresses are incremented automatically by using the number of copies.
6. For distributed installations:
Select the CameraManagement server in the CameraManagement server
dropdown list.
7. For distributed installations:
Select the MultimediaDatabase in the MultimediaDatabase dropdown list.
8. Optional: Select the settings that you want to copy from the camera used as
a template.
9. Confirm with OK.
NVR Software - SeeTec Surveillance
65
Advertisement
Table of Contents
