Layer Menu; Adding Windows / Layers; Save Local Layer - SUPERLOLUX NI525A User Manual

NVR Software - SeeTec client
4.2

Layer menu

4.2.1

Adding windows / layers

If multiple monitors are connected to a PC, you can add multiple SeeTec windows.
1. In the Layer menu, select Add window and open the new window.
There are several ways to display the desired layer in the new window:
 Temporary layer:
Right-click into the new window and select the Add layer menu.
Alternatively, select Add layer in the Layer menu. Use Drag and Drop to
add cameras, maps and web pages from Camera overview to the new
layer.
 Predefined layer, map or camera:
Use Drag and Drop to add cameras, maps or layers from the Camera
overview to the new window.
4.2.2

Save local layer

1. Right-click on the tab of a temporary layer and select Save layer as local
layer to save the temporary layer. See chapter Adding windows / layers
(page 50).
2. In the following dialog, enter a name for the layer in the Name field.
50
Important
The following settings must be configured for each client and for
®
each Windows login profile.
Note
You can also save temporary layers. See chapter Save local layer
(page 50). If you want to make the layers available permanently
when starting SeeTec 5 surveillance, all required layers must be
created in Configuration Mode and must be assigned to a
corresponding profile.
The user-defined layers allow you to define the number of rows and
columns in the layer, see chapter Layers (page 97).
Right-click to close the current layer or all open layers in the current
window. You can also save the temporary layer.
Layers permanently assigned in the profile cannot be closed.