Nvr Software - Seetec Client; File Menu; Language Selection; Changing Passwords - SUPERLOLUX NI525A User Manual

4

NVR Software - SeeTec client

The SeeTec client is available as 32-bit version and 64-bit version. When the client
is installed on a 64-bit operating system, both client versions will be installed
always. The link in the start menu always connects to the 32-bit client.
1. To start the 64-bit version of the SeeTec client, double-click on the file
SeeTec 5.exe in the C:\Program Files\SeeTec directory.
The 64-bit version of the SeeTec client is subject to some restrictions. A list with
these restrictions can be found here:
http://seetec.eu/fileadmin/01DL/manuals/seetec5_64Bit_Client_restrictions_EN.pdf
4.1

File menu

Surveillance Mode, Archive Mode, Report Mode, Configuration Mode
See chapter General (page 59).
Important
The following settings must be configured for each client and for
each Windows
4.1.1

Language selection

1. In the File menu, select Language selection.
2. Select the desired language.
3. Click on OK.
The selected language will be used after the client is restarted.
4.1.2

Changing passwords

1. In the File menu, select Change password.
2. Enter your new Password.
3. Confirm your new Password.
4. Click on OK.
Note
You cannot change your password in Configuration Mode.
In Authorization Management, you can withdraw the user right to
change the password.
®
login profile.
NVR Software - SeeTec client
41