Table of Contents
Advertisement
8
NVR Software - Appendix
8.1
SeeTec OfflineViewer
With the SeeTec OfflineViewer you can access exported image data that was saved
in the SeeTec image format.
8.1.1
Installation
By default, the SeeTec OfflineViewer is also installed during a standard or client
installation.
The installation file SeeTec-OfflineViewer_Setup.exe is located in <SeeTec
installation directory>\tools\OfflineViewer.
During export, the SeeTec OfflineViewer installation file is copied to the export
directory.
1. Execute the file and follow the instructions.
The installation requires .NET Framework 2.0. If .NET Framework 2.0 is not already
installed, this will happen automatically.
8.1.2
Use
1. Start the SeeTec OfflineViewer in the start menu link under All Programs >
SeeTec 5.
2. Use the Select data button to select the path where the exported image
data is located.
3. Click on Import data to use the image data in the SeeTec OfflineViewer.
Note
Reading of data in SeeTec OfflineViewer can take some time.
4. Select the recording you want to view in the left window.
5. Enter Password specified during export.
Now you can play or browse the recording as in SeeTec Surveillance.
6. In order to select a different recording, delete the current camera from the
tile. Right-click on the current camera and select Delete camera from
layer.
7. Click on the new time range to view. Alternatively, use Drag and Drop to
drag the desired time range to the already used tile.
NVR Software - Appendix
179
Advertisement
Table of Contents
