Button Bar; Alarm List Tab - SUPERLOLUX NI525A User Manual

NVR Software - SeeTec Surveillance
5.3.8

Button bar

The button bar displays all the buttons assigned to the user. These buttons can
be used for the following purposes:
 call a URL
 Start actions
 Start / stop recording
 Connect digital inputs
 Start / stop alarm scenarios
 Starting patrols
 Start external applications
1. To add a button, switch to Configuration Mode and select the Buttons
dialog.
5.3.9

Alarm list tab

As soon as an alarm occurs, a popup window is displayed for alarms with high
priority. You can then add a comment for this alarm. The buttons have the following
meaning:
Confirm
Reject
Postpone
146
The alarm is confirmed, deleted from the alarm list, and the
next alarm with a higher priority is displayed.
The alarm is rejected, deleted from the alarm list, and the next
alarm with a higher priority is displayed.
The alarm is postponed and marked as postponed in the alarm
list. NO other alarm is displayed until an alarm from the alarm
list is restarted by a right click or until the alarm is confirmed.
This provides the opportunity to confirm multiple alarms at the
same time.
However, new alarms are still displayed.
Note
When the alarm has ended or if another alarm occurs, low-priority
alarms are marked as Confirmed and are deleted from the Alarm
list. These alarms do not have an alarm status.
In Archive Mode, the alarm status (Open, Confirmed, Rejected)
is displayed in the Alarm overview.