Table of Contents
Advertisement
3. Click on New pause.
The length of the pause determines the duration until the camera moves to the
next preset position or until the next action is triggered.
4. Click on Up or Down to shift an entry within a group.
Note
Adding groups improves clarity.
5.2.13
System Management
The System Management dialog enables the generation of automatic system
configuration backups. These backups are stored in ZIP format to save space and to
enable a rapid restore of the surveillance environment in the event of a system
failure. With the SMTP server and E-mail Management tabs, you can modify the
settings for e-mail notification for camera or SeeTec service failure and predefined
alarm scenarios. Furthermore, you can use SNMP messages for system error
reporting.
Backup (MaxDB)
By using the Use automatic backup option, you can specify a Time in the
designated field for performing a system configuration backup. MaxDB used in
SeeTec 5 as a management and event database. The backup is performed at a
certain time on a daily or weekly basis on the day you chose from the dropdown
list. If no path of location is specified for automatic data backup, the backup is
stored in the following directory:
\SeeTec\sapdb\backup
The name of the backup file will correspond to the following naming convention:
SeeTec_A_yyyymmdd.hhmm.zip
If the option Delete old files is enabled, a maximum of eight backup files is
stored. Manual backup files are NOT deleted.
Note
The path of location may not contain spaces or special characters
and must be available locally on the SeeTec server.
NVR Software - SeeTec Surveillance
125
Advertisement
Table of Contents
