Table of Contents
Advertisement
Note
Certain alarms are valid only during specific times, such as motion
detection alarms that are not triggered during business hours.
Select a time template for the Validity option.
Under File > Client configuration in the Client tab, you can
specify whether the most recent or old alarms will be displayed first.
The Comment field features an autocomplete functionality. It
supports the user by completing the user input. The last ten
comments are saved and suggested to the user if required.
Validity
If you want the alarm to be triggered during a certain time range only, select the
corresponding time template in the Validity dropdown list. You can create time
templates in the Time management dialog.
Coloring
You can adjust the coloring of the alarm in the Alarm list in Surveillance Mode
by using the Font color and Background color buttons.
Note
In Archive Mode, the background color is used for displaying the
alarm recording in the time line. If no background color was
selected, the alarm will be displayed in red.
Test
Use the Test button to initiate the alarm scenario for test purposes in order to
verify the configuration. If you have changed the alarm scenario, save it before
testing by clicking on Apply.
Start (simple mode)
All triggers that initiate this event series are selected with the Start option of an
alarm scenario by clicking on Edit. You must create or enable these triggers prior
to configuring the alarm scenario. Buttons are an exception. They must be defined
at a later point of time using the Buttons menu option. An incoming TCP signal
from a camera recognizing motion, for instance, can be a start event. This is
realized via the SeeTec Network I/O.
NVR Software - SeeTec Surveillance
113
Advertisement
Table of Contents
