Password - SUPERLOLUX NI525A User Manual

NVR Software - SeeTec Surveillance
®
Windows Active Directory
Using Windows
1. Create a new group in Active Directory
2. Add domain users of the group in Active Directory
SeeTec Active Directory
3. Create a group in SeeTec software analog to the group in Active Directory
and take capitalization into account while doing this.
4. Allocate the desired authorizations to the SeeTec group in SeeTec software
and activate the option Enable Active Directory support Activate
Directory.
When starting the software, users can now log on to SeeTec 5 directly with the
Active Directory-Login button without having to fill in the User name and
Password fields.
5. To automate Active Directory
AutoADLogin in the link to SeeTec Surveillance, see chapter Command line
parameters (page 175).

Password

Using secure passwords / changing passwords
A secure password is at least eight characters long, contains at least one upper,
one lower case character and one number. Special characters are also allowed.
1. To force a user to use a secure password, enable the User must use a
secure password option.
2. Activate User may change password to allow the user to change his or her
own password.
104
®
support
®
Active Directory
®
.
Note
You need not create any user within SeeTec software to login via
®
Active Directory . The rights are allocated with the data stored in
the SeeTec groups.
To do this, create a group in Active Directory
corresponding users. You only need to create the group in the
SeeTec 5 system.
®
®
.
®
login, specify the command line parameter
®
who should login via
®
and add the
®