The Cool Down light illuminates during the cool down part of the
cycle. Laundry cools for ease in handling.
The Clothes Dry light illuminates when the drying cycle is
finished. This indicator stays on during WRINKLE GUARD
The WRINKLE GUARD
light illuminates when this option is
selected. This indicator stays on during WRINKLE GUARD
Check Lint Screen
The Check Lint Screen light reminds you to check the lint screen.
The light illuminates when the user selects a cycle. It goes out
when the door is opened, Start is pressed, or after 5 minutes
Other indicator lights show Cycle, Options, Modifiers and Cycle
Signal settings selected. The display shows the estimated or
actual time remaining.
Select the drying cycle that matches the type of load you are
drying. See Auto or Timed Preset Cycle Settings charts.
AUTO DRY CYCLES
Auto Dry Cycles allow you to match the cycle to the load you are
drying. See the following Auto Preset Cycle Settings chart. Each
cycle dries certain fabrics at the recommended temperature. A
sensor detects the moisture in the load and automatically adjusts
the drying time for optimal drying.
Use this cycle to get high heat for heavyweight mixed loads,
cottons and jeans.
Use this cycle to get high heat for drying heavy fabrics such as
towels, sheets or cottons.
Use this cycle to get medium heat for drying sturdy fabrics such
as work clothes.
Use this cycle to get low heat for drying no-iron fabrics, such as
sport shirts, casual business clothes and permanent press
Use this cycle to get extra-low heat to gently dry items such as
lingerie, blouses or washable knit fabrics.
Auto Preset Cycle Settings
Follow care label directions.
Auto Dry Cycles
loads, cottons, jeans
Towels, sheets, cottons
Corduroys, work clothes
Business casual clothes,
washable knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the TIME ADJUST (More Time or Less Time)
buttons. See "Changing Cycles, Modifiers and Options."
NOTE: Timed Cycles may also be used with the dryer rack. See
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as blankets and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature setting.
Use this cycle for drying small loads or loads that need a short
Timed Preset Cycle Settings
Heavyweight, bulky items,
blankets, work clothes
*Default times are remembered from the previous cycle.