Temporary Room Set Adjustment - Tekmar 541 User Brochure

Temporary Room Set Adjustment (Schedule Only)
If your thermostat is using a schedule and you would like to temporarily change the
current heating temperature:
Make sure you are in the View menu. If not, press the Menu button until VIEW
1.
displays in the top left corner.
Press the Item button to select either the 'Room' or 'Room Set' item.
2.
Press the Up or Down button to enter the 'Set Heat' mode. The words 'TMPY
3.
HOLD' will appear indicating that you are only making a temporary change.
Continue pressing the Up or Down button to adjust the desired temperature.
Ten seconds after the adjustment has been made, the display will return to the
4.
default item. The words 'TMPY HOLD' will remain on the screen for the 3 hour
duration of the temporary change.
OR
To cancel the temporary hold before it expires, press and hold the Up and Down
5.
buttons at the same time.
© 2007 U 541 - 08/07
Wait 10
seconds
6 of 12