Set Temp Menu - Tekmar 554 User Manual

Hide thumbs Also See for 554:
Table of Contents

Advertisement

Screen Clean Menu
Entering the Screen Clean menu gives you 30 seconds to clean the thermostat and
display with a moist cloth. Do not use solvents to clean the thermostat.

Set Temp Menu

Entering the Set Temp menu allows you to permanently change both the day
and night
temperature settings for both heating and cooling.
If your thermostat is being used for radiant floor heating, a floor sensor can be
connected and floor minimum day
floors heat the air by raising the floor temperature. Setting a floor temperature is a
way of enhancing the comfort of your living space.
Air Temperature Only - ---- - - - - - - - - - - - - - - - - - - - - - - - - -- - -- - - -- - - - --- - --
If there is only an air temperature sensor (no floor sensor), the thermostat operates
to control your desired air temperature.
Floor and Air Temperature - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - -- --
If the air sensor is turned on and a floor sensor is connected, the thermostat will
maintain your desired air temperature as well as a minimum floor temperature.
Controlling temperature this way is recommended for areas with large windows that
allow the sun to shine into a room and keep it warm without the need for additional
heat. This can allow the floors to cool off during the afternoon. When the sun goes
down, it can take a long time for the floors to get warm again and the room may
cool off too much in the early evening. A floor minimum setting can help with this
condition by maintaining a floor minimum temperature. Keep in mind the floor
minimum temperature will override the air temperature, and if set too high, may
overheat the room.
This operation is recommended for rooms with hardwood floors, as well as those
with large windows. Setting floor minimum and maximum temperatures is a way of
enhancing the comfort of your living space while protecting your floor coverings.
90°F (32°C)
Feels hot to the touch
80 to 85°F (26 to 30°C)
Feels warm to the touch
70°F (21°C)
Feels cool to the touch
40 to 45°F (5 to 7°C)
Feels cold to the touch
A Watts Water Technologies Company
and night
- ---- - - - - - --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Suggested maximum for all floor
types other than wood.
Bathrooms and kitchens. Suggested
maximum for wood floors.
Rooms with large windows to prevent
under-heating in the evening.
Freeze protection for garages.
8 of 12
temperatures can be set. Radiant
© 2015
554_U - 02/15

Advertisement

Table of Contents
loading

Table of Contents