Tekmar 541 User Brochure page 8

Hide thumbs Also See for 541:

Table of Contents

To select a scene:

1. Use the Menu button to select the Scene menu.

2. Use the Item button to select the Select item.

3. Use the Up or Down button to select the desired

scene.

Default Scene: The default scene is Permanent 1.

•

In a typical installation, the thermostat follows the

schedule.

Factory set scene: When you select a factory set scene (2, 3, and 6), all of

•

the thermostats using the scene feature use the temperature specified by the

scene.

Custom scenes: When you select a custom scene, your installer will have preset

•

each thermostat using the scene feature to either follow its regular schedule, or

go to the set wake, occupied, unoccupied, sleep or away temperature.

Scene

Permanent Away 2

Permanent Unoccupied 3 Unoccupied

Temporary Occupied 6

Example:

A house is normally in scene

Permanent 1. There is a master

bedroom that operates on a

schedule and there is a guest

bedroom that is normally set

to Unoccupied. When a guest

arrives, the scene is to change to

Permanent 4. Scene 4 changes

the guest room to operate on the

setback schedule.

U 541 - 08/07

Description

Permanent 1

Permanent 4

Permanent 5

Temporary 7

Temporary 8

Thermostat Operation