Avaya INDEX 4602 Installation Manual page 11

Installation Procedure
QoS Option Setting
Administering QoS options is not mandatory, but it is highly recommended. The
802.1Q must be switched on for the following procedure to be applicable (see
step 8 of Static Addressing Installation).
Use the following procedure to set Quality of Service (QOS) options.
1. While the phone is on-hook and idle, press the following sequence of keys
2. Enter a valid value (between 0 and 7).
3. Enter a valid value (between 0 and 7).
4. Enter a valid value (between 0 and 63).
5. Enter a valid value (between 0 and 63.
INDeX 4602 IP Telephone Installation Manual
38DHB0002UKCQ – Issue 2 (11/06/2003)
3
on the faceplate of the telephone:
Mute 7 6 7 # ( Mute Q O S # )
The following text is displayed left-justified at the top of the display:
L2 audio=d
New=_
where d is the value of the 802.1 audio quality parameter.
The following text is displayed left-justified at the top of the display:
L2 signaling=d
New=_
where d is the value of the 802.1 signaling quality parameter.
The following text is displayed left-justified at the top of the display:
L3 audio=dd
New=_
where dd is the value of the Differential Services audio quality parameter.
The following text is displayed left-justified at the top of the display:
L3 signaling=dd
New=_
where dd is the value of the Differential Services signaling parameter.
If no new values were entered during this procedure, the following text is
displayed left-justified at the top of the display:
No new values
#=OK
Press # to terminate the procedure.
If new values were entered during this procedure, the following text is
displayed left-justified at the top of the display:
Save new values
*=OK #=yes
Press the * button to terminate the procedure, or the # button to save the
new values. If you press the # button, the following text is displayed:
New values?
Being saved
The new values are saved, and the user interface is restored to its previous
state.
IPNC Setup - Page 11
Installation Procedure - Page 11
IPNC Setup