HighPoint RocketRAID 35 User Manual page 7

•
S.M.A.R.T monitoring hard drive status for reliability
•
Staggered Spinup with user selection in BIOS
•
(MAID) spin down drives when array is idle
Array Monitors, Alerts and Indicators
•
SMTP for email notification
•
Hardware Monitor function(RocketRAID 3560)
•
Alarm / Buzzer alerts for drive failure
•
SAF-TE (I2C) support
•
SGPIO enclosure management (RocketRAID 3530/3540/3560)
•
SNMP for remote management
•
Ethernet port for OBM (Out of Band Managment)
•
NTP (Network Time Protocol)
•
Intelli-VRM. (Intelligent Virtual RAID Managment)
•
SHI – Storage Health Inspector (S.M.A.R.T. and disk maintenance)
RAID Management
•
TerabyteSaver™ and TerabyteGuard™ for Data Protection and Reliability
•
Firmware update in the Operating System
•
Hot key (ctrl-h) boot-up RAID manager via BIOS
•
API library for customizing AP
•
Command Line Interface (CLI)
•
Web browser-base RAID management software
•
Disk scrubbing to prevent degraded RAID arrays
•
Bad sector repair and re-mapping to reduce dropped drives
•
ATA pass-through mode support
Operating System Support
• Windows XP, 2003, Vista, 2008 (32 and 64-bit versions)
•
Linux
•
FreeBSD
•
Mac OS X 10.4.x & 10.5.x
•
GPL licensed driver into Linux Kernel 2.6.25
Congratulations
7