HighPoint RocketRAID 35 User Manual page 45

Windows Vista/2008 Driver Installation
Installing the driver during a fresh Windows Vista/2008 installation
1. Boot from Windows Vista DVD.
2. When the screen "where do you want to install Windows" appears, click "Load
driver" and browse for the driver location. Windows Vista will accept install
drivers from various sources: floppy diskette, USB flash disk or CD. If you are
using the RocketRAID 35xx software CD, the drivers are located in
RR3xxx_4xxx – Windows-Driver – VistaWin2008 – 32 (or 64, if you are
running a 64-bit version of the operating system).
3. Select the RocketRAID 35xx controller driver, and click "Next".
4. The driver is now installed – you can now commence with the standard OS
installation procedures.
Installing the driver for an existing Windows Vista/2008 system
1. Intall the RocketRAID 35xx host adapter into the PC, then boot up Windows.
2. Windows should automatically detect the card, and display the "Found New
Hardware" wizard pop-up window. Select "Locate and install driver software".
When Windows asks: "Windows needs your permission to continue", select
"continue".
3. Select "I don't have disc, show me other options" and then select "Browse my
computer for driver software".
4. Specify the location of the driver and click "Next. If you are using the
RocketRAID 35xx software CD, the drivers are located in RR3xxx_4xxx –
Windows-Driver – VistaWin2008 – 32 (or 64, if you are running a 64-bit
version of the operating system).
5. When asked: "Would you like to install this driver software?" select "Install".
6. Reboot the system when prompted. The RocketRAID 35xx will be available for
use after Windows reboots.
HighPoint RAID Management and Device Driver CD
45