HighPoint RocketRAID 35 User Manual page 18

Hardware – Description and Installation
2.2 – Installing the HighPoint Ethernet Board for RocketRAID 3522
.
Host Adapter
1. Installing the
HighPoint Ethernet Board – the
HighPoint Ethernet Board
U1 is the RJ45 connector. J1 is connector for connecting the HighPoint Ethernet
Board to the RocketRAID Host Adapter. If you want to use the Ethernet functions,
connect the HighPoint Ethernet Board to the RocketRAID Host Adapter via connec-
tors J24 through J1, and secure the two boards to the bracket. If you do not want to
use the Ethernet function, secure the RocketRAID Host Adapter to the bracket.
2. Illustration shows RocketRAID 3522 host adapter with Ethernet Board installing
.
18
following illustration shows the