Additional Functions And Settings - HighPoint RocketRAID 35 User Manual

RocketRAID BIOS Utility
6 – Additional Functions and Settings
Set Boot
Highlight the target array from the Array window and press Enter. Highlight Array
from the toolbar:
Note: Use this option to set an array to act as the boot device. The selected array
will act as the boot "disk", if the motherboard's BIOS instructs the card to act as
the system's boot device.
Hot-Swap
The BIOS utility provides several options that allow the administrator to add or
remove disks and arrays, without powering down the system.
Adding/removing Disks
To prepare a disk for removal, first highlight the target disk using the Disk window
and press Enter. Highlight Disk from the toolbar, select Unplug, and press Enter.
38