Eaton Powerware 9155 User Manual page 49

Table 4. User Settings (continued)
Description
Modem Config
Start Screen
User Password
Audible Alarms
Battery Charging
Automatic Battery Tests
Full Power Battery Test
Number of Battery Strings
Battery Capacity
Battery Low Alarm Level
Set Nominal Output Voltage
Bypass Voltage High Limit
Bypass Voltage Low Limit
Nominal Output Frequency
Synchronization
EATON Powerware
® 9155 Parallel UPS (8–15 kVA) User's Guide
Available Settings
Modem Installation
Set Modem Call Events
Set Modem Init String
Set Modem Call Command
Set Modem Communication Password
Eaton Powerware logo
Mimic screen
Enabled/Disabled
If Enabled is selected, the password is USER.
Normal Sound/Disabled
ABM cycling/constant
Enabled/Disabled
Enabled automatically runs the battery test
once a month.
Enabled/Disabled
0 through 22
(see "Configuring the UPS for EBMs" on
page 49)
1 through 65535 watts per cell
1.750 through 1.950 volts per cell
120V/240V
120V/208V
110V/220V
100V/200V
127V/220V
+1 through +20% (1% increments)
-1 through -20% (1% increments)
50 Hz or 60 Hz
Enabled/Disabled
S 164201592 C www.eaton.com/powerquality
OPERATION
Default Setting
<Not Installed>
Event #0
Call modem: no
ATZ0
None
None
Eaton Powerware logo
Disabled
Normal Sound
ABM cycling
Enabled
Enabled
2 strings for UPS-32 models
4 strings for UPS-64 models
34 W/cell
1.880 V/cell
120V/208V
120V +10%
120V -15%
60 Hz
Enabled
43