Eaton Powerware 9155 User Manual page 34

INSTALLING OPTIONS
28 EATON Powerware
8. Secure the Powerware Hot Sync CAN Bridge Card with the screws
removed in Step 2.
9. On the bottom cover (and also the middle cover if 3-high), remove a
knockout tab in the top edge of the cover for each cable:
With wire cutters, cut either side of the tab and twist down to
remove the tab (see Figure 20).
10. Route the cable(s) to the approximate location of the cover access
holes.
® 9155 Parallel UPS (8–15 kVA) User's Guide
Figure 20. Removing Knockout Tabs
S 164201592 C www.eaton.com/powerquality