Eaton Powerware 9155 User Manual page 43

Parallel ups 8–15 kva

Hide thumbs Also See for Powerware 9155:

Table of Contents

Figure 27. Front Ground Strap Installation (2-High Cabinets Shown)

EATON Powerware

9155 Parallel UPS (8–15 kVA) User's Guide

Remove the top front covers of all cabinets.

Press and release the handle latch at the bottom of the cover and

then lift the cover up and off the cabinet.

Install the remaining ground straps between each cabinet (see

Figure 27).

10. Reinstall the top front covers removed in Step 8.

Hang the top edge of the cover on the cabinet first, then lower the

bottom edge and snap into place.

11. Continue to "Operation" on page 39 to start up the UPS.

NOTE After UPS startup, ensure maximum battery runtime by configuring the UPS for the

correct number of EBMs (see page 49).

Front Ground Strap

EXTENDED BATTERY MODULE INSTALLATION

164201592 C www.eaton.com/powerquality

Table of Contents