Replacing The Dust-Filters - Contex HD5450 User Manual

Maintenance

Replacing the Dust-Filters

Scanner Models: HD5450, HD4250, HD4230, HD3650,
HD3630
The dust filters protect your scanner's air-cooling vents. Fresh dust filters
can reduce the amount of time spent on cleaning and calibration ad help
protect the scanner's glass plate. WIDEsystem monitors usage and will
warn you when it is time for a replacement.
1. Turn the scanner power off and disconnect the power plug.
2. Locate the 2 square-shaped dust filter bins on the underside of the
scanner.
3. Insert a screw-driver or other sharp tool under one of the bin's edges
to snap it down and detach it from its frame.
4. The filter (soft material) is inside the bin. Remove the old filter and
place a fresh one in the bin.
5. Reattach (click on) the bin to its frame on the underside of the
scanner.
6. Repeat the process with the second filter.
Dust Filters to change
Dust Filter Bins
53