Table of Contents
Advertisement
Maintenance
7
Reinsert the pressure platen and close the lid
1.
Lift the Pressure platen by its handle and reinsert it into the scanner.
2.
On each end, you will need to press down the metal button with one hand, and with
the other hand, push the slider back from the Exit position to its Normal position.
3.
Push the sliders away from the scanner middle until they reach the edge (Normal
position).
1. Reinsert the pressure platen
2. and 3.
Push down on the button so the slider can move back into its normal position.
32
The slider back in its
Normal position
Hide quick links:
Advertisement
Table of Contents
