Table of Contents
Advertisement
Loading
Unloading the original after scan
1.
Press the Paper Reverse button to eject the original back to the
scanner feeding bed.
2.
Press the Paper Forward button if you wish to eject the original out
the back of the scanner.
Fast-loading
Fast-loading is a time-saving loading option designed for batch scanning.
The fast-loading option can be selected in the scanning application.
NOTE: The availability of the fast loading option will depend on your
scan/copy software
and its level of compatibility with the scanner model.
What is Fast-loading? – With normal (default) loading, i.e. without the
Fast-load option selected, the original is pulled all the way into the drive
system, past both roller axles, and then reversed to start-scan position in
order to ensure precise detection of the original's placement in the scanner.
With the Fast-load option selected, the original is pulled only under the first
roller axle and scanning will start from there. The Fast-load option is
convenient for batch scanning of originals with robust edges that feed
easily. Normally, with batch scanning, you would use the Fast-load option
in conjunction with automatic loading however you can also use manual
loading to feed the original into start-scan position.
Soft-handling
The Soft-handling option is selected in your scan application. Soft-handling
means that feeding and scanning are slowed down. You can use the option
with both Manual and Automatic loading.
NOTE: The availability of the soft handling load option depends on
your
scan/copy software
and its level of compatibility with the scanner
model.
Use Soft-handling with
1.
Old, curled or creased originals that trigger a paper jam. See
Shooting – Paper Jam error
for correcting a paper jam error.
2.
Fragile originals you want passed delicately through the drive system.
Setting the input size
The Input size defines the scan area. You enter the input size in your
application's input size dialogs.
NOTE: The availability of the Input size options described below will
depend on your
scan/copy software
scanner model.
3 ways to set find and set the input size:
Use automatic size detection - The scanner will detect the edges of
1.
the document and calculate the input size for you.
Set a standard size - common standard sizes are marked on the
2.
scanner bed. Use these markings to determine which standard size
matches the original and then select that size in the application's input
size dialog.
Set the size manually for irregular sizes. To measure your document -
3.
use the scanner's ruler just above the insertion slot. Enter your width
measurement in the width setting field in your application's input size
setup dialog. You can measure and set a length value or choose
automatic length detection.
20
Trouble
and its level of compatibility with the
Hide quick links:
Advertisement
Table of Contents
