Automatic Shut Down After Idle Time - Contex HD5450 User Manual

Power ON/OFF
When the Timer is active:
Your scanner will store and remember your settings so you have them after
you turn off your PC and shutdown the WIDEsystem program. When you
restart WIDEsystem, the Timer tab will display the values currently stored
in the scanner.
If the scanner is being used, it will delay entry into Sleep mode. The power
LED on the panel will blink just before entry into a scheduled sleep mode.
You can cancel entry into Sleep mode by pressing the power button.

Automatic Shut Down After Idle Time

Scanners: HD5450, HD4250, HD4230, HD3650,
HD3630, HD2530
On delivery, the scanner is set for automatic entry into sleep mode after a
preset default idle time, i.e. the length of time the scanner is not active. You
can prolong or shorten the idle time value to match your normal workflow.
To change/set the sleep mode options:
1. Open WIDEsystem - double-left-click the scanner icon
system tray.
Select the Timer Tab.
2.
Select or deselect the Enter Sleep mode automatically option.
3.
If you do not select the Enter Sleep mode automatically option, you will
4.
need to use the manual method for entering sleep mode by holding the
power button down for 3 seconds.
If you do select Enter Sleep mode automatically option, proceed to the
5.
next step to set the Idle time value.
Set the value Idle time before entering sleep. This is the number of
6.
minutes the scanner can stand idle before entering the sleep mode on
its own.
Press Apply to download your settings into the scanner's memory.
7.
Sleep Mode options in the WIDEsystem program – Timer tab
NOTE: With the scanner main power ON, the scanner can be also be
brought into Wake-up and Sleep modes manually even while the Enter
in the
sleep mode automatically option is selected.
Wake - by pressing any button on the panel or inserting a document

for scanning.
 Sleep – by pressing and holding down the power button for 3 seconds.
You can choose to disable automatic entry into Sleep mode entirely if you
want only manual activation of the sleep mode or, you can leave it enabled
and retain both manual and automatic functions.
18