AT&T SB67118 DECT 6.0 User Manual page 87

Appendix
Telephone base display screen messages
Message full
Msg. transferred to
mailbox X
No handsets
registered
No items stored
MOH currently in
use. Please try
again later.
Please enter
another access
code.
Please set alert #
Press SPKR to
confirm the
alert call
PTT To:
X:Handset X
Release PTT
key to stop
Sorry, this mailbox
is being used.
Speed dial X
No number
The system is busy.
Please try again
later.
This is your
mailbox.
Users in mailbox.
Please try again
later.
Transfer to:
(For systems with two or more
handsets)
XX Missed calls
The system memory is full. You cannot record new messages
unless you delete some old messages.
A message is transferring from the general mail to a particular
private mailbox.
There are no handsets registered to the base to deregister.
The redial list is empty.
You cannot record or playback music on the telephone base while
a call is listening to the current hold music.
The access code you are trying to save already exists in
the system.
You are trying to confirm the alert number or set the notify alert
on or off before you set the alert number.
Press the telephone base speakerphone to call the alert
call number.
You are using push to talk (PTT) intercom feature to call
Handset X, release the one-touch EXT 1-0 key to complete a
one-way conversation.
You cannot access a mailbox that is being used.
You cannot initiate a speed dial without a telephone number
stored in that speed dial location.
The system resources are all occupied.
You cannot transfer a message to the telephone base
general mailbox.
You cannot access a private mailbox in use. You should try
again later.
You have started the intercom process and need to enter the
number of the handset you wish to call.
There are new calls in the caller ID information.
81
to complete a