Table of Contents
Advertisement
Getting started
Mailbox setup (for handset)
You can access handset mailboxes from the telephone base. Please see
Handset mailbox overview in the SB67108 handset manual.
Fast answer mode
You can change the fast answer mode setting of your handset mailbox from
the telephone base. The number of rings can be two (on) or five (off). The
default is five rings. Please see Fast answer mode on or off in the SB67108
handset manual for more information.
1.
When the telephone is idle, press
telephone base.
2.
Press the one-touch EXT 1-0 key for the destination
extension mailbox.
3.
Use the dial pad to enter the four-digit remote access
code of the extension. Use REMOVE to backspace and
delete a digit. Press
4.
Press
or
ENTER.
Press
MENU/
5.
Press
or
6.
Press
ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit without making
changes, press EXIT.
Handset announcement setup
You can set or change the handset announcement from the telephone base.
The announcement is the greeting callers hear when calls are answered by
the handset mailbox.
The handset has the pre-recorded announcement "Hello, please leave a
message after the tone." You can use this announcement, or replace it with
your own recording.
Your announcement can be up to two minutes.
1.
When the telephone is idle, press
Press the one-touch EXT 1-0 key for the destination extension mailbox.
2.
3.
Use the dial pad to enter the four-digit remote access code of the
extension. Use REMOVE to backspace and delete a digit.
ENTER.
Press
MENU/
4.
Press
or
ENTER.
MENU/
ENTER.
MENU/
to scroll to Fast answer mode.
to select On or Off.
to scroll to Handset anncemnt. Press
Messages on the
Messages on the telephone base.
33
Enter mailbox
access code:
0001
ENTER=Next
2 New messages
Handset anncemnt
To general MBox
>
Fast answer mode
Fast answer mode
:On
ENTER=Save
2 New messages
Play all
Deliver
>
Handset anncemnt
Advertisement
Table of Contents
