Speed Dial Setup; Enter, Edit Or Delete A Speed Dial Number; Customer Support - AT&T SB67118 DECT 6.0 User Manual

Getting started

Speed dial setup

The telephone base has 10 speed dial locations where you can store the
telephone numbers you wish to dial using fewer keys than usual. You can
store up to 32 digits in each location.

Enter, edit or delete a speed dial number

1. When the telephone is idle, press MENU
2. Press or
ENTER.
MENU/
3. Press or
then press
MENU/
4. Use the dial pad to enter or edit the telephone number
up to 32 digits. If you want to delete the entry, erase all
the digits.
• Press REP or SKIP to move the cursor to the left
or right.
Press REMOVE to backspace and delete digits.
•
Press and hold REMOVE to delete all digits.
•
ENTER to save the setting and return to
5. Press
MENU/
the previous menu. There is a confirmation tone. To exit without making
changes, press EXIT.
NOTES:
1. See Calling a speed dial number on page 39 for instructions on calling a speed dial number.
2. The memory locations for speed dial and the directory are not the same, so setting up speed dial
numbers does not decrease your directory storage space.

Customer support

Use this feature to display the AT&T website.
1. When the telephone is idle, press MENU
2. Press to scroll to Customer support. Press
3. To exit, press EXIT.
to scroll to Speed dial setup. Press
to choose the desired speed dial location,
ENTER.
.
/ENTER
.
/ENTER
ENTER.
MENU/
35
Mailbox setup
Base setup
COVM
Speed dial setup
>
Speed dial 1
>
Speed dial 2
Speed dial 3
Speed dial 4
Enter phone #:
8888832445
ENTER=Save
Enter phone #:
8888832445
ENTER=Save
Base setup
COVM
Speed dial setup
Customer support
>
www.telephones
.att.com