Options While On Calls; Volume Control; Call Waiting - AT&T SB67118 DECT 6.0 User Manual

Telephone base operation

Options while on calls

• To override automatic line selection, press LINE 1-LINE 4
for the desired line, then lift the handset.
To edit a number:
While the desired number displays, press
• Press REP or SKIP to move the cursor to the left
or right.
• Press REMOVE to backspace and delete characters.
• Press and hold REMOVE to erase all digits.
Press PAUSE
•
pause (a P appears) (page 56).
• Press FLASH to enter a flash (page 56).
To delete a number:
• While the screen displays the desired number, press
REMOVE to delete the number from the redial memory.

Volume control

While on a call, press VOL+ or VOL- to adjust the
listening volume.
NOTES:
1. The corded headset and corded handset volume settings are the same, but they are independent
volume settings from the speakerphone.
2. While using the volume control, you hear a triple beep when you've reached the minimum or
maximum level.

Call waiting

If you subscribe to call waiting service with your telephone service provider,
you hear a beep if someone calls while you are already on a call.
• Press FLASH to put your current call on hold and take the
new call.
• Press FLASH at any time to switch back and forth
between calls.
NOTES:
1. If you miss a call while the line is in use, the caller ID of the missed call displays for 15 seconds
after your current conversation ends.
2. For more information on caller ID with call waiting, see page 60.
to enter a 3.5 seconds dialing
/REDIAL
ENTER to enter editing mode.
MENU/
3.5 seconds dialing dialing
41
Line1
8888832445
8888832445
Deleted
Volume
FLASH