System Speed Dial - Inter-Tel Analog Endpoint User Manual

Creating Station Speed-Dial Buttons
If your endpoint has programmable buttons, you can program one or more as speed-
dial buttons. After the button is programmed, you must select a speed-dial location to
associate with the button.
NOTE:
Before you program a speed-dial button, you need to store a number in a
speed-dial location (see the previous instructions).
To program a speed-dial button:
With the handset in the cradle, dial
1.
Press the feature button you want to program as a speed-dial button.
2.
Dial
3.
3
Dial the speed-dial location (0-9) or select the location on your display that con-
4.
tains the number you want to associate with the button.
To view how your Station Speed-Dial buttons are programmed:
With the handset in the cradle, dial
1.
Press the desired Station Speed-Dial button. The name or number is displayed.
2.
Press
3.
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
If necessary, select an outgoing line. You have the following options.
•
To use a location number: Dial
Dial location number (0-9).
•
To use a Station Speed-Dial button: Press the desired Station Speed-Dial but-
ton.

System Speed Dial

Your system administrator can store several speed dial numbers in the system speed
dial locations. Depending on the size of your system, you can access up to 1000 or up
to 5000 system speed dial locations, if they have been programmed.
To view and/or dial System Speed-Dial numbers:
Press
1.
Dial the location code (000-999 or 0000-4999) for the desired number.
2.
Press
3.
54
.
2
8
to exit.
#
or dial
SYS SPD 3 8 1
to dial the number.
#
.
3 9 7
.
3 9 6
and then the desired Station Speed-
3 8 2
.
Inter-Tel
®
Analog Endpoint User Guide