Chapter 1
Ecology features
Toner Save
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a
Press
, 1, 4, 1.
b
Press a or b to choose On or Off.
Press OK.
c
Press
.
Note
We do not recommend Toner Save for
printing Photos or Greyscale images.
Sleep mode
The Sleep Time setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
were turned off. Receiving data or starting an
operation wakes the machine up from Sleep
mode to Ready mode.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax or makes a copy,
the timer will be reset. The default setting is 3
minutes.
While the machine is in sleep mode the LCD
will show Sleep.
a
Press
, 1, 4, 2.
b
Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c
Press
.
2
Deep Sleep mode
1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
1
the machine will automatically enter Deep
Sleep mode, and the LCD will show Deep
Sleep. Deep Sleep mode uses less power
than Sleep mode. The machine will wake up
and start warming up when the machine
receives fax data or when you press a key on
the control panel.
1
1