Control panel
Water container
Grease filter
Food probe
Temperature / Core temperature
The water container and food probe are located behind the
control panel. The ? sensor is used for opening and closing
the control panel.
The panel is fitted with a device which will automatically stop
it moving if it meets an obstruction whilst opening or closing.
Do not touch the door handle whilst the panel is opening or
closing!
Water is pumped into the water container and then into the
steam generator.
Do not block the opening at the front of the water
container.
Fit the grease filter in the back wall for all roasting
programmes.
It should be removed when using steam programmes.
It must also be removed when baking, as otherwise results
can be uneven (Exception: fit the grease filter in the back wall
when baking open deep fresh fruit flans, e.g. plum or damson
or pizza with lots of topping).
The food probe measures the core temperature in the food,
enabling the temperature during the cooking process to be
monitored simply and accurately.
Some functions have recommended temperatures and where
appropriate a pre-set core temperature for the food probe.
You can alter the recommended temperature within a given
range (see "Functions") for an individual cooking process or
permanently (see "Settings"). You can alter the core
temperature for the food probe within a given range for an
individual cooking process or a cooking stage.
Description of the functions
25