Miele DGC 6805 Operating And Installation Instructions page 149

Problem
F 190
F 196
F ..
Other fault codes
Possible cause and remedy
Faulty inlet valve
This message may appear if the lift-up panel is
opened or closed whilst water is being taken into
the appliance. Press "OK" to continue.
If the same message appears again, call the Ser-
vice Department.
There is a fault.
^ Switch the appliance off and then back on again.
The filter in the bottom of the oven is not positioned
correctly.
^ Switch the appliance off and replace the filter
correctly:
then switch the appliance back on.
If, having corrected the problem, this fault
message appears again, contact the Miele Ser-
vice Department.
Technical fault.
^ Switch the appliance off and call the Service
Department.
Problem solving guide
149