About This Manual; Organization Of This Manual - National Instruments DAQ PCI E Series User Manual

Organization of This Manual

© National Instruments Corporation
This manual describes the electrical and mechanical aspects of each
board in the PCI E Series product line and contains information
concerning their operation and programming. Unless otherwise noted,
text applies to all boards in the PCI E Series.
The PCI E Series includes the following boards:
• PCI-MIO-16E-1
• PCI-MIO-16E-4
• PCI-MIO-16XE-10
• PCI-MIO-16XE-50
• PCI-6031E (MIO-64XE-10)
• PCI-6032E (AI-16XE-10)
• PCI-6033E (AI-64XE-10)
• PCI-6071E (MIO-64E-1)
The PCI E Series boards are high-performance multifunction analog,
digital, and timing I/O boards for PCI bus computers. Supported
functions include analog input, analog output, digital I/O, and
timing I/O.
The PCI E Series User Manual is organized as follows:
• Chapter 1, Introduction, describes the PCI E Series boards, lists
what you need to get started, describes the optional software and
optional equipment, and explains how to unpack your PCI E Series
board.
Chapter 2, Installation and Configuration, explains how to install
•
and configure your PCI E Series board.
• Chapter 3, Hardware Overview, presents an overview of the
hardware functions on your PCI E Series board.
xi
About
This
Manual
PCI E Series User Manual