Bus Interface - National Instruments DAQ PCI E Series User Manual

RTSI
Calibration

Bus Interface

Power Requirement
Physical
© National Instruments Corporation
Appendix A
Digital Trigger
Compatibility ......................................TTL
Response.............................................Rising or falling edge
Pulse width .........................................10 ns min
Trigger Lines ......................................7
Recommended warm-up time ................ 15 min
Calibration interval .............................1 year
External calibration reference .............>6 and <10 V
Onboard calibration reference
Level ............................................5.000 V (±2.5 mV) (actual
Temperature coefficient ...............±5 ppm/°C max
Long-term stability.......................±15 ppm/
Type ...................................................Master, slave
+5 VDC (±5%)
PCI-MIO-16E-1, PCI-6071E ........1.1 A
PCI-MIO-16E-4 ...........................0.9 A
Power available at I/O connector ........+4.65 to +5.25 VDC at 1 A
Dimensions
(not including connectors) .................17.5 by 10.6 cm (6.9 by 4.2 in)
I/O connector
Specifications for PCI-MIO-16E-1, PCI-MIO-16E-4, and PCI-6071E
value stored in EEPROM)
A-11
1 000 h
PCI E Series User Manual