Pl 10.12 Inverter Assembly (2 Of 4) - Xerox WC5632 Service Manual

PL 10.12 Inverter Assembly (2 of 4)

Item Part Description
1 – Inverter output assembly (P/O PL
10.11 Item 23)
2 – Post fuser gear (20T) (REF: PL
10.15 Item 7)
3 013E36980 Bearing
4 – Dog drive assembly (REF: PL
10.15 Item 6)
5 – Idler gear (20T) (REF: PL 10.15
Item 4)
6 – Tri-roll knob (REF: PL 10.15 Item
12)
7 – Inverter gate (Not Spared) (REP
10.11)
8 – Tri-roll shaft assembly (Not Spared)
(REP 10.12)
9 006K29971 Post fuser exit roller
10 – Tri-roll guide (P/O PL 10.11 Item
23)
11 – Front gravity finger (P/O PL 10.11
Item 23)
12 – Gravity gate finger (P/O PL 10.11
Item 23)
13 – Rear gravity gate finger (P/O PL
10.11 Item 23)
14 – Upper baffle (P/O PL 10.12 Item
22, PL 10.12 Item 23)
15 – Idler roll (P/O PL 10.12 Item 22, PL
10.12 Item 23)
16 – Idler roll shaft (P/O PL 10.12 Item
22, PL 10.12 Item 23)
17 – Spring (P/O PL 10.12 Item 22, PL
10.12 Item 23)
18 – Post fuser jam clearance latch
(REF: PL 10.15 Item 11)
19 – Inverter sensor (P/O PL 10.12 Item
22) (65-87 ppm)
20 – Hinge pin (P/O PL 10.12 Item 22,
PL 10.12 Item 23)
21 – Torsion spring (P/O PL 10.12 Item
22, PL 10.12 Item 23)
22 038K17842 Upper baffle assembly (65-87 ppm)
(REP 10.7)
23 – Upper baffle assembly (REF: PL
10.12 Item 22) (32-55 ppm) (NOTE)
(REP 10.7)
24 604K54010 Inverter transparency feed kit (W/
TAG 004)
25 604K54630 Rear gravity gate finger kit
NOTE: For 32-55 ppm speed machines do not connect the
sensor.
WorkCentre 5687 Family
September 2008
5-65
Parts Lists
PL 10.12