Cn63300 Process Controller Part Numbers - Omega CN63100 Series User Manual

CN63300 PROCESS CONTROLLER PART NUMBERS

Options and Output Boards are factory configured per the part number specified. Part numbers without replacement output boards
listed must be returned to the factory for output board replacement.
All part numbers are software version V4.0 or greater. Models with Remote Setpoint Input, RS485, or Main Analog Output or include a
second setpoint.
DEDICATED MAIN
DEDICATED
MAIN CONTROL
ALARM 1
CONTROL O1 OR A1
A1 OUTPUT
O1 OUTPUT (ALARM 1)*
Relay
Relay
Relay
Relay
Relay Relay
Relay Relay
* - These part numbers have a single output, programmable as either Control (PID) or as an Alarm.
** - These part numbers are jumper and program selectable for either a current or voltage Linear DC output.
@ - These part numbers are equipped with a second setpoint.
A2 (ALARM 2) REMOTE
A2 OR 02 SETPOINT RS485@
(SECOND) * INPUT@
Relay
Relay YES
Relay YES
Relay
Relay YES
PART NUMBERS
MAIN
ANALOG
OUTPUT**
18 to 36 VDC/ 24 VAC
@
CN63300-R1-LV
YES CN63300-R1-R2-F3-LV
YES CN63300-R1-R2-F3-RSP-LV
YES CN63300-R1-R2-F3-C4-LV
CN63300-R1-R2-AL-LV
CN63300-R1-R2-AL-C4-LV
-79-
REPLACEMENT
OUTPUT
85 to 250 VAC
BOARD
CN63300-R1 CN6-48100
CN63300-R1-R2-F3 N/A
CN63300-R1-R2-F3-RSP N/A
CN63300-R1-R2-F3-C4 N/A
CN63300-R1-R2-AL CN6-48111
CN63300-R1-R2-AL-C4 CN6-48111