Super Chlorinate The Pool Water - Pentair INTELLITOUCH User Manual

Super Chlorinate the Pool Water

Periodically, it may be necessary to "super chlorinate" the pool and/or spa.
Go to the Chlorinator screen.
Getting There
MENU SETUP EQUIPMENT CHLORINATOR
1. Press the SUPERCHLOR button.
2. The default run time for super chlorination is 24 hours.
Press the buttons next to HOURS TO RUN to change
the run time to super chlorinate.
3. Press Save when done. The chlorinator will start super
chlorination mode (100%) and automatically switch
on the filter pump. When super chlorination has been
completed the system will return to normal operation.
4. To cancel super chlorination: Go back to the
Chlorinator Screen. The time left for super chlorination
is displayed.
5. Press the button under Cancel Super Chlor.
6. Press Exit to return to the main screen.
Note: For information about wiring a salt chlorine generator
to the IntelliTouch system , see "Wiring IntelliTouch to a Salt
Chlorine Generator," on page 112.
MODEL NAME HERE
STATUS
OK - NO ERRORS
WATER SALT LEVEL 2900 PPM
DOWN HOURS TO RUN 24 UP
CONTROL ENABLED YES
MENU/SETP/EQUIP/INTELLICHLOR
SUPER
SAVE
BACK CHLOR EXIT
MODEL NAME HERE
STATUS
OK - NO ERRORS
WATER SALT LEVEL 2900 PPM
HOURS REMAINING 22 @ 100%
CONTROL ENABLED
YES
MENU/SETP/EQUIP/INTELLICHLOR
'CANCEL'
BACK SAVE EXIT
SUPER CHLOR
IntelliTouch Control System User's Guide
®
55