Routing The Cables - SMART Board Board X800i4 Configuration And User's Manual

C H A P T E R 2
Installing your interactive whiteboard system

Routing the cables

When connecting cables from a SMART UF65 projector to the interactive whiteboard, make sure that
all cables pass along the top of the interactive whiteboard wall-mounting bracket and then down the
right side of the interactive whiteboard.
When connecting cables from a SMART UF65w projector to the interactive whiteboard, make sure
that all cables pass between the two interactive whiteboard wall-mounting brackets. Space your wall-
mounting brackets' innermost screw holes 4" (10.2 cm) apart to provide full support for the weight of
your interactive whiteboard.
N
N O T E
Don't connect the power cable to a power outlet until you've connected all the cables to the
projector and ECP.
10