SMART Board Board X800i4 Configuration And User's Manual page 6

I M P O R T A N T I N F O R M A T I O N
When transporting your SMART product, repack it with as much of the original packaging as
l
possible. This packaging was designed with optimal shock and vibration protection.
If your SMART product requires replacement parts, make sure the service technician uses
l
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
I
I M P O R T A N T
Use the instructions included with the ECP to install your interactive whiteboard, projector
l
and ECP. The instructions in your SMART Board interactive whiteboard box do not include
instructions for installing the SMART UF65 or SMART UF65w projector or ECP.
Make sure an electrical socket is near your SMART product and remains easily accessible
l
during use.
Using your SMART product near a TV or radio could cause interference to the images or
l
sound. If this happens, move the TV or radio away from the projector.
If you have peripheral devices that do not use a 4-pin mini-DIN connector or an RCA
l
composite video jack, or if your device has an audio connection that does not use RCA
jacks, you may need to purchase third-party adapters.
There are no projector menu options on the ECP. Keep your remote control in a safe place
l
because the ECP is not a substitute for the remote control.
Do not disconnect cables from the ECP to connect peripherals because you could
l
disconnect controls for your interactive whiteboard or host computer.
Turn off your SMART product before cleaning it.
l
iv