MAIN CLUTCH CABLE ADJUSTMENT
The main clutch cable must be adjusted properly before adjusting the drive
belt. An improperly adjusted main clutch cable may cause the drive belt to slip
on its pulleys, resulting in loss of power or premature wear or damage to the
drive belt.
Check and adjustment should be made with the handlebar in the 2nd position
from the bottom.
1. Check the free play of the main clutch lever at the tip of the lever when the
lever is released.
Free play should be: 15.0 - 20.0 mm (0.59 - 0.79 in)
2. If adjustment is necessary, loosen the lock nut and turn the cable adjusting
nut in or out until the correct free play is obtained.
3. After adjusting the cable free play, tighten the lock nut securely.
FREE PLAY
MAIN CLUTCH LEVER
15-20mm
STOPPER
\\
91
ADJUSTING
NUT
MAIN CLUTCH CABLE
45