CLUTCH CABLE ADJUSTMENT
1.Set the handlebar height in the center position (see page 19).
2.The clutch spring should extend 0.08 ± 0.02 in (2.0 ± 0.5 mm)
when the clutch lever is moved from the DISENGAGED position to
the ENGAGED position.
3.If the spring extension length is incorrect, loosen the lock nut and
turn the adjusting nut in or out just enough to extend the spring. Do
not overtighten. After adjustment, tighten the lock nut.
LOCK NUT
THROTTLE CABLE ADJUSTMENT
Measure the free play at the lever tip.
Free play: 0.39 – 0.59 in (10.0 – 15.0 mm)
If the free play is incorrect, loosen the lock nut and turn the adjusting
nut in or out as required.
After adjustment, tighten the lock nut.
ADJUSTING NUT
THROTTLE
LEVER
0.39 – 0.59 in
(10.0 – 15.0 mm)
SERVICING YOUR TILLER
CLUTCH SPRING END
0.08 ± 0.02 in
(2.0 ± 0.5 mm)
ADJUSTING
NUT
LOCK NUT
37