Pre-Operation Check; Engine Oil - Honda FR650 Owner's Manual

Honda tiller owner's manual
Hide thumbs Also See for FR650:
Table of Contents

Advertisement

3. PRE-OPERATION
CHECK
ENGINE OIL
1. Place the tiller on a level surface.
2. Remove the oil filler cap and wipe the dipstick clean.
3. Insert the dipstick into the oil filler neck, but do not screw it in.
4. If the level is low, fill to the top of the oil filler neck with the recommended
oil.
Running
the engine
with a low oil level will cause
serious
engine
damage.
Use 4-stroke motor oil that meets or exceeds the requirements for API service
classification SF or SG. Always check the API SERVICE label on the container
to be sure it includes the letters SF or SG.
Using nondetergent
oil can shorten
the engine's
service life, and using
P-stroke oil will damage the engine.
SAE 1 OW-30 is recommended for general use. Other viscosities shown in the
following chart may be used when the average temperature
in your area is
within the indicated range.
ENGINE OIL hLLER
\
CAP/DIPSTICK
OIL FILLER NECK
UPPER
10
-30
-20
-10
0
Y)
20
30
4o.c
Ambient
temperature

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr750

Table of Contents