Nxes104 Expansion Board And Remote Control; Nxes104 Physical Description; Ethersound In Port - Yamaha Nexo NXAMP4X4 User Manual

NXES104 EXPANSION BOARD AND REMOTE CONTROL

NXES104 expansion board and remote control
On the back panel of the NXAMP Powered TDcontroller there is a slot where the user can
easily insert an expansion board to add digital inputs and remote control to the unit.
Since July 2009, all NXAMP4x1s and NXAMP4x4s are shipped with an expansion card fitted
in, the NX-DFLT card. This card prevents output noises when main AC power feeding
NXAMPs is brutally shutdown (ie power down at the end of the show before NXAMPs are
switched off). NX-DFLT card should always be fitted in when no other expansion card is
used.
Today the only available expansion board is the NXES104, compatible with the
Ethersound™ network technology (in its ES100 version). This board offers 4 digital inputs
chosen among the 2 x 64 Channels of 24 bits/ 48 KHz audio data of the Ethersound™
frame, and also remote control of the unit through the PC based application ESmonitor™.
WARNING! Only 48 KHz Ethersound networks are supported.

NXES104 Physical description

The NXES104 is designed to fit the NEXO's slot form factor that can be located on the back
panel of the NXAMP Powered TDcontrollers.
NB: This slot features an 80-pins internal connector that is not compatible with the Yamaha
mini-YGDAI slot.
4 3 2 1
™
(1) Ethersound IN Port
This Port features and Ethercon connector. Always use this type of connector to secure
your Ethersound™ network from unwanted unplugs. This type of connector also ensures a
longer life to the internal RJ-45 contacts, because it preserves it from external traction.
Use this port as an Ethersound™ IN port when connecting to an Ethersound™ network.
PAGE 60 OF 91