Output Meters; Mute Button; Volume Control; Gain Control - Yamaha Nexo NXAMP4X4 User Manual

NXES104 EXPANSION BOARD AND REMOTE CONTROL

(8) Output meters

For each channel there are two output meters; the left one is showing the output voltage
(V), whether the right one is showing the output current (A).

(9) Mute button

Click on this button to mute or unmute individually a channel.

(10) Volume control

This button can set up the volume for each channel of the NXAMP. To adjust the volume
with this virtual pot, you can click and drag the button itself or use the mouse wheel while
you are on the virtual pot area or use the two small arrows bellow the virtual pot.
N.B.: On some setups the volume settings may be linked.

(11) Gain control

To adjust the gain on one channel, use the two small arrows bellow the value display. You
can also simply goes onto this control and use the mouse wheel.
N.B.: On some setups the volume settings may be linked.

(12) Delay settings

Use the small buttons bellow the text box to increase or decrease the delay settings for
each channel.
N.B.: On some setups the delay settings may be linked.

(13) ArrayEQ settings

To adjust the ArrayEQ on one channel, use the small arrows bellow the text box. You can
also simply go to this control by utilizing the mouse wheel.
N.B.: On some setups the ArrayEQ settings may be linked.

(14) Headroom settings

By using the small arrows bellow the text box the Headroom value for one channel can be
adjusted. You can also simply go to this control by utilizing the mouse wheel.
N.B.: On some setups the Headroom settings may be linked.

(15) Amplifier Status

This control displays the current status of the Amplifier. If all parameters are OK (like
temperature, DC offset, mains value, etc...) the display will be "NXAMP ALL OK". If not, the
PAGE 71 OF 91