Yamaha Nexo NXAMP4X4 User Manual page 49

MENU DESCRIPTION
Once the button "Save" has been pressed, you will be requested to enter the name for that
user setup (default name is USERSET followed by the setup number). Starting from the
first character, turn the wheel to choose a letter, and then depress the "select 4" (for
"Next") button to go to the next letter. Depressing button "select 1" (for "Prev") will go
back to the previous character. When the last letter has been reached, press the "B" button
again to actually save the setup. A confirmation message will be displayed on screen.
Once the settings are saved, the unit will go back to the default screen, but the scene
number will be displayed on top right corner of the LCD screen, as shown on the picture
bellow.
104. PS10R2 NXS XO2-4 Scene29
~
LS600 (1-3) ~
NB: If settings are manually changed regarding the recalled scene, the scene number will
disappear from the default menu. If settings are adjusted back to the saved value of the
scene, the scene number will appear again in the default menu.
To recall a user setup select the memory block you want to use by turning the wheel till the
chosen memory block appears on the top line of the LCD screen. Then press the "Select 4"
button (for "Recall"). Anytime you can exit this menu by depressing the "A" button (for
"Back").
PAGE 49 OF 91